Building model ships is an absorbing hobby, but it can be even more enjoyable if the correct tools are used. There are some specific tools necessary to do the job, such as a good hand drill with a selection of miniature drill bits, something in the region of 0.5mm and 2mm as a general rule. Small files and wood rasps are very usefull, not just for cleaning up the decorative fittings, but also taking off any waste wood when releasing frames from laser cut sheets. A small pin hammer is a must, and can be used in conjunction with the Amati pin pusher, this clever little device saves on injured digits by allowing you to guide a tack gently into the frame with precision. Obviously a good selection of modelling knives is crucial, and the Expo metal shaft handles allow for a variety of cutting blades to be fitted, not to mention specialist chisels & gouges. Curved blades are best for making straight cuts, whilst a straight blade allows for intricate cuts. Miniature needle nosed pliers allow for manipulating small fittings as would a good set of tweezers. Vices and clamps are effectively a third hand, and a good magnifyer is also important, preferably one that's suspended on a free standing base. Fortunatly Antics supply a fantastic range of modellers tools from Expo. Some are some very specific tools for period ship building, plank benders for example reduce the risk of frustrating splitting or breaking of the often wafer thin planking strips, and the Amati Loom-a-line is an excellent rigging frame for building vessels with difficult to rig ratlines. see our hints and tips page for more info.
Artesania Latina Wooden Ship Building Tool Set (27000)
An excellent 10-piece set of the key tools needed for building wooden model ships.
Set includes cutters and a scalpel knife for trimming planks, drill and drill bit to drill holes for pins, ensure the pins do not split the planks, a hammer to drive the pins home, angled tweezers ideal for many tasks from positioning small parts to holding pins square plus a file and sanding block for smoothing and finishing of your models.
Loom-a-line is a handy rigging jig for all sailing ships with rigging andall kinds and dimensions. Using this tool rigging will be done very easily. Now you can ensure equal tension on all your lines and tie perfect knots.
Amati Nail Nailer with 100 Pins (7384) Fine pin pusher/nailer for model ship hull construction and other modelling where fine pins need to be inserted accurately.
Amati Master Cut (7386) This special tool makes quick and accurate miter cuts in wooden or plastic strips and ensures that all cuts are identical. Fully adjustable from 45° to 90°. Sturdy plastic and metal construction, assembles in minutes. Kit includes also some spare blades. Base dimensions cm. 15,5x10
Lord Nelson Base Coat Varnish 125ml (45100) Lord Nelson varnish has been specially developed for the builders of wooden model ships to provide an excellent natural wood finishmore..
Lord Nelson Gloss Varnish 125ml (45103) Lord Nelson varnish has been specially developed for the builders of wooden model ships to provide an excellent natural wood finishmore..
Lord Nelson Matt Varnish 125ml (45101) Lord Nelson varnish has been specially developed for the builders of wooden model ships to provide an excellent natural wood finishmore..
Lord Nelson Semi-Matt Varnish 125ml (45102) Lord Nelson varnish has been specially developed for the builders of wooden model ships to provide an excellent natural wood finishmore..
Antics on-line with model shops in: Stroud (HQ), Bristol, Cardiff, Gloucester, Guildford, Plymouth, Worcester and Coventry. We stock a full range which includes plastic kits, radio control cars, diecast models, railways, planes and boats etc. Click on the links under "Available to buy now" or any picture in order to start shopping. Offers subject to availability. E&OE.
Ships
Search
Index
Checkout
Back